Skip to main content

HeidelbergCement works towards Europe’s largest printed residential building

Published by , Deputy Editor
World Cement,

Layer by layer: Europe’s largest residential building is currently being printed in Bavaria at a rate of 18 metres per minute. For this purpose, HeidelbergCement has delivered about 170 t of printing material specially developed for concrete 3D printing. The innovative material ‘ 3D’ was already used about eight weeks ago to print the first residential building in Germany in the Westphalian town, Beckum.

“With this second project in Germany, we are taking the next step and show that our material is also suitable for printing larger residential units and blocks of flats,” says Dr. Jennifer Scheydt, Head of the Department Engineering & Innovation at HeidelbergCement Germany. “The material is easy to pump and extrude. Moreover, it quickly develops sufficient load-bearing capacity so that the lower layers do not give out under the load of the upper layers. The bond between the layers is also ensured. At the same time, the unerring strength development of ‘ 3D’ ensures a printed image with high form accuracy,” continues Scheydt.

The block of flats with approximately 330 m2 of living space will be the largest printed residential building in Europe upon completion. The project in Wallenhausen, Bavaria, is scheduled to take six weeks of printing in total. The house is being printed by PERI with a BOD2 3D concrete printer. “For this project, the PERI team is once again relying on HeidelbergCement as a proven and innovative partner,” says Dr. Fabian Meyer-Brötz, head of 3D Construction Printing at PERI. “Our experiences with ‘ 3D’ on both construction sites are very good and we are very satisfied with the collaboration and of course the material.”

The residential building is built with a complete cellar and will offer four flats on two storeys with about 330 m2 of living space upon completion. This is not a research or demonstration project, as the flats will be rented out as normal after completion.

“The future has begun,” says Dr. Jennifer Scheydt. “The innovative material for 3D printing enables applications for all shapes and sizes. We are convinced that this new way of building will prevail in the coming years.”

Read the article online at:

You might also like


Embed article link: (copy the HTML code below):


This article has been tagged under the following:

Heidelberg Cement news European cement news