Skip to main content

One year on: South Ferriby plant resumes clinker production

Published by
World Cement,

High tides, strong winds and low atmospheric pressure in December 2013 led to the River Humber breaching flood defences and flooding Cemex’s South Ferriby cement plant and the surrounding community, with waters reaching 2 m high. After just over a year and with significant efforts from Cemex’s 150-strong workforce and more than 400 contractors, production has resumed at the plant.

One of the two cement kilns at the plant was commissioned this week and has begun producing clinker. While the plant has been out of action, orders have had to be fulfilled using cement from Cemex’s Tilbury and Rugby plants. In the last year, as work has been focused not just on reinstating production, but also to establish a production plant of the future.

“South Ferriby plant had grown organically through the site for the last 80 years; the flood gave us the opportunity to rebuild it in a logical way to today’s standards with tomorrow’s production in mind," says Philip Baynes-Clarke, Plant Director.

Repair and replace

Two key challenges immediately after the flood were to secure and clean the site and establish welfare facilities for the people who would be needed to rebuild the plant. Soon 160 portacabins were secured, some from as far away as Scotland, to provide accommodation for administration, laboratories, canteen and welfare facilities.

The flood had swept through the site, cutting off the 11 000 volt electric supply and destroying 30 switch rooms and two substations. Today over 6.4 km of high voltage cable has been laid to create a new infrastructure of cables to supply the various operations throughout the site. These cables lead to one electrical substation, which houses modern electrical switchgear.  

In addition 30 switchrooms have been rebuilt along with the vast majority of the site’s electrical systems, a huge undertaking. Other efficiencies such as LED lighting have been built in to the systems to provide savings in electricity.  

With the failure of the electric supply when the flood hit, one of the kilns stopped in mid-production with hot material still in it. This caused the kiln shell to bend due to the high thermal load. Months of work have been spent replacing a 22 m section of the 65 m long kiln.

All elements of the cement production process are now controlled from a centralised computer providing immediate response and allowing for improved optimisation. This new state-of-the-art control system replaces five control rooms, which are all marked for demolition in the coming months.

Philip Baynes-Clarke comments: “Hundreds of thousands of parts have been replaced with expertise from colleagues and specialist companies from around the world. Cemex colleagues from the plant have worked tirelessly and the last year has been a learning curve for everyone with new systems and procedures to adopt.

“Rebuilding the plant in 12 months has been no mean feat and I am immensely proud of what we have achieved. The refurbished plant will allow us to continue our heritage of producing quality cement, sustainably, safely and efficiently now and for many years to come.”

Adapted from press release by

Read the article online at:


Embed article link: (copy the HTML code below):