Skip to main content

United Cement Group continues to improve the energy efficiency of its production

Published by
World Cement,


Kant Cement Plant, JSC, part of United Cement Group, upgrades its equipment to increase thermal efficiency.

Today, countries of all over the world strive for even higher efficiency of electricity consumption by adopting advanced mechanisms and standards in construction, installing energy-efficient equipment, and introducing other comprehensive measures.

By 2030, annual consumption of electric energy per capita is expected to grow up to 2665 kWh, or by 71.4%, compared to 1903 kWh in 2018. At the same time, this value is significantly lower than that in countries like Korea (9711 kWh), China (4292 kWh), Russia (6257 kWh), Kazakhstan (5133 kWh) or Turkey (2637 kWh) as of the end of 2018.

Energy efficiency and energy-saving are among the most important factors for the successful implementation of ongoing economic and social reforms in Uzbekistan. Increasing the energy efficiency of the economy while also decreasing its energy consumption would be crucial for better electric energy provision across the country.

United Cement Group (UCG), as a company that focuses on the highest business standards and sustainability, is also committed to the ESG principles.

Since June 2022, Kant Cement Plant, JSC, which is part of our holding, has begun lining of its rotary kiln used for cement production. Lining of this kiln will help reduce heat losses and improve the energy efficiency of the production in general. The temperature difference in the kiln before and after lining is about 100 degrees Celsius. The lining works were performed using RMAG–H2 bricks that boast improved wear resistance and longer service life. In addition, HALBOR–400 refractory bricks were also used.

Read the article online at: https://www.worldcement.com/europe-cis/15062022/united-cement-group-continues-to-improve-the-energy-efficiency-of-its-production/

You might also like

Celebrating a century in cement

AUMUND Group gives the story behind how an inventor and engineer’s office became an international conveying and storage technology brand, supplying cement producers world-wide.

 
 

Embed article link: (copy the HTML code below):