Skip to main content

Cemex hard at work across France

Published by , Editor
World Cement,

Cemex’s team in France has been working hard to demonstrate how beautiful concrete can be, working closely with architects, engineers, and construction crews on stunning buildings. From a library in Vitrolles to an office building on the banks of the Saône River, each project is as unique as the vision of each architect.

Image: Le Groupe Cardinal

The contrast between the future multimedia library in Vitrolles and the neighbouring buildings is striking. Architect Jean-Pierre Lott – who is known for using raw concrete in his creations – designed this modern building to have an elaborate 8-metre-high concrete wall with undulating curves and punctuated with irregular openings to let in natural light. Building the wall itself was no easy feat - as the mezzanine is designed to be wider than the ground floor, the wall is actually suspended in mid-air, requiring a special structure that had to be built in order to pour the concrete. The architect envisioned the entire wall as one seamless piece, without a construction joint, so three different forms had to be stacked to be able to pour from a height of 9 m - higher than the wall itself. At this height, the concrete increases the pressure in the formwork and requires very slow, precise pouring.

Meanwhile in east-central France, architect Rudy Ricciotti's Pavilion 52 office building in the La Confluence neighbourhood of Lyon is beginning to take shape. Located on the banks of the Saône River, this 5-story, 7700 m2 building defies convention, unfolding in beautiful curving shapes and making ample use of concrete. Cemex has collaborated with Ricciotti previously on several of his designs, which are known for featuring concrete. The facade of level of the Pavilion 52 building features Cemex’s horizontal fiber-reinforced concrete slats, and inside, Cemex concrete is showcased as a smooth finish on all surfaces, rather than hidden under a false ceiling as is sometimes common. The slabs had to be poured with a 58-meter long pump, a rare piece of equipment in France that Cemex brought in from Paris.

In the town centre of Lyon’s Caluire-et-Cuire community, the future facility that will be part of the Pierre Bourdon sports complex also emphasizes raw materials, especially concrete. Fradin Weck Architecture opted for a minimalist design for this building commissioned by the town’s municipal authority. The architects required flawless colour and finishes from the material, so Cemex worked together with the client to design special solutions that would tackle the architectural challenges of 10-metre-high walls using Cemex’s raw, white cement. To limit the drop height of the concrete and be able to pour the slab in one pour, Cemex ordered special sleeves in different lengths and had air-tight short sleeves made to measure in order to avoid air bubbles between the tube and the sleeve.

Smaller projects have also been made possible through the versatility of Cemex concrete: in the Ramatuelle community near St. Tropez, Cemex contributed to a specially designed villa with a unique requirement. Architect Antony Ugo liked the look of wooden walls, but needed to build with a material that could better withstand the damaging effects of sea spray, so Cemex’s self-tinted architectural concrete was poured into wooden moulds to create slabs with an imprint of wood grain. In order to avoid a cookie cutter appearance, every mould was made from a different wooden board which had to be individually sanded down to bring out the wood grain and then coated in hot, liquid wax before pouring. This meticulous process meant that a single, 30 m wall took five days to complete. A unique custom-made roof made with Cemex’s high-performance fibre-reinforced concrete completed the villa.

Edited from source by Joseph Green. Source: Cemex

Read the article online at:

You might also like

A first in North America

Lafarge Canada and Geocycle Canada pilot 100% circular production of clinker in Nova Scotia.


Embed article link: (copy the HTML code below):