Skip to main content

Sika supplies Total Corrosion management solution

Published by
World Cement,


Over the past four years Southwark Council has invested £326 million into ensuring all of its homes are warm, dry and safe. At the Four Squares Estate in Bermondsey, South London, Sika has supplied a Total Corrosion Management solution – including over 60,000m2 of Sika Ferrogard 903+ corrosion inhibitor – during the £12.9 million regeneration of four housing blocks providing homes to almost 700 families.

The Four Squares Estate was built between 1971 and 1975 and features 691 homes across four near-identical seven-storey blocks: New Place Square, Lockwood Square, Marden Square and Layard Square. Following a structural inspection by consulting engineers Arup, all Four Squares housing blocks were deemed to be structurally sound but large areas of previously uncoated concrete were exhibiting reinforcement corrosion.

Specialist contractor Barwin and Sika worked closely with clients Keepmoat and Southwark Council to carry-out on-site trials using Sika Ferrogard 903+ to demonstrate its ability to penetrate the concrete, reach the steel and restore it to a state of passivity. The tests indicated that the system successfully encapsulated and protected the reinforcement, and the decision was taken to include the corrosion inhibitor in Sika’s comprehensive Total Corrosion Management specification that also comprised repair mortars and protective coatings.

“Due to its age and on-going exposure to the elements, all four buildings’ concrete exteriors were suffering from corrosion, as well as stalactites, excessive sediment and efflorescence caused by leaking balconies,” said John Connell, Contracts Manager at Barwin. “A two-stage jet wash was required to clean and prepare the previously uncoated substrate before the application of Sika Ferrogard 903+ mixed corrosion inhibitor across all external elements.”

Designed to extend the service life of aesthetically valuable concrete surfaces, more than 60,000m2 of Sika Ferrogard 903+ was spray-applied by Barwin’s team of operatives. Easy to apply and cost-effective, Sika Ferrogard 903+ penetrates the concrete to provide a protective layer around steel reinforcement whilst maintaining the aesthetics of the structure.

Having been appointed by Southwark Council to complete a series of refurbishment projects, Barwin then applied the two part Sika® MonoTop® to make repairs to the damaged concrete frame. The system’s first layer inhibited corrosion and improved the lifespan of the steel reinforcement, whilst also acting as a bonding bridge for the second layer – a repair and re-profiling mortar.

To provide a final layer of weather protection, SikaGard was also applied. For the soffits and remaining concrete surfaces except ringbeams, SikaGard® - 675W anti-carbonation coating was applied to seal against the ingress of water, chlorides and carbonation. To prevent the ingress of carbon dioxide and moisture whilst permitting two-way water vapour diffusion on ring-beams and horizontal surfaces, SikaGard® - 550W Elastocolor completed the application.


Adapted from press release by

Read the article online at: https://www.worldcement.com/europe-cis/02032016/sika-supplies-total-corrosion-management-solution-608/


 

Embed article link: (copy the HTML code below):